Page 18
16” Victorian
K
K
K
K
C
D
K
K
K
K
AERATION
TUBES
H PEBBLES
E PEBBLES
K PEBBLES
A&B PEBBLES
C&D PEBBLES
BASE LAYER
SECOND LAYER
A,B, C,D & F
PEBBLES
FRONT AND TOP LAYER
Figure 26 – Elite 16” Victorian
18” Victorian
K
K
K
K
K
K
K
K
K
K
C
D
AERATION
TUBES
H PEBBLES
E PEBBLES
K PEBBLES
A&B PEBBLES
C&D PEBBLES
BASE LAYER
SECOND LAYER
A,B, C,D & F
PEBBLES
FRONT AND TOP LAYER
Figure 27 – Elite 18” Victorian
2.6. Fitting the Trim (Thermobox Only)
1. Most trims are coated with a protective
film. This must be removed by peeling
off before fitting the trim.
2. The trim is held on by four magnets.
These will either be attached to the trim
or supplied loose in a separate envelope.
Space them as shown in
Figure 28
.
3. Offer the trim onto the flange of the
firebox. The magnets will hold the trim in
position.
4. Centralise the trim as necessary.
Magnets
Figure 28
