MAGICFX
®
SNOWCASE
—
User and Installation Manual
11
Menu function Explanation
Lock/Unlock
Controller
Holding the Lock button for more than 5 seconds will “lock” the
display functions. Meaning buttons will not respond. This to avoid
accidental change of parameters via display.To unlock, hold the
Unlock button for more than 5 seconds.
Reset Errors
In case there is a locking error present, this button will reset the
appliance. If the fault does not persist, the locking error will not
reappear.
DMX Start
Address (1-512) Setting the DMX start address.
DMX Safety
Address (1-512) Setting the DMX safety address.
DMX Footprint
This parameter indicates the DMX footprint, in other words the
amount of sequential channels used by the appliance. This does
not include the safety channel.
RDM (On/Off)
This function turns on/off the RDM functionality.
Manual Mode
(On/Off)
This turns manual mode on or off. Via manual mode the user is able to
control the SNOWCASE without the need for a DMX lighting console.
Run Timer [sec]
(0-600)
This parameter represents the on time duration of the on/off cycle
of the effect.
Unique ID (HHHHHHHHHHHH)
Bootloader CRC
Serial Number (DDDDD)
Build Date
Information
Software Version
Software CRC
Uptime (DDDD:HH:MM:SS)
Effect Time (DDDD:HH:MM:SS)
Error History
Type (Alarm/Error)
MAGICFX_SNOWCASE_UM-IM_EN_v01-00_A5.indd 11
14-10-2019 08:11:23