MAGICFX
®
SMOKEBUBBLE BLASTER
—
User and Installation Manual
13
2
BUBBLE SAFELY!
The MAGICFX
®
SMOKEBUBBLE BLASTER has been designed and constructed in such a
manner that it can be used safely. This applies to the use, the circumstances and the
regulations as described in this documentation. Reading this documentation and
following the instructions are therefore necessary for everyone who is authorised to
work with the MAGICFX
®
SMOKEBUBBLE BLASTER.
The MAGICFX
®
SMOKEBUBBLE BLASTER must be used in surroundings that:
• Have a stable temperature of between 5 and 50 °C.
• Have a relative humidity degree between 20 % and 90 % (non condensing).
• Are free of dust, corrosive gases and high concentrations of organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1
GENERAL SAFETY RULES
• Only authorised persons may carry out work with the MAGICFX
®
SMOKEBUBBLE
BLASTER.
• Do not use the MAGICFX
®
SMOKEBUBBLE BLASTER if there are people or
animals in the direct output.
• Make sure there are no objects in the direct output that can be damaged by
the MAGICFX
®
SMOKEBUBBLE BLASTER (e.g. by getting wet).
• Make sure that children, unauthorised people and animals do not obtain
access to the MAGICFX
®
SMOKEBUBBLE BLASTER.
• Do not connect more units to a single electrical circuit than the installed fuse
is able to handle. (Calculate the summed load with the electrical data from
Chapter 1)
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
• Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
2.2
INDOOR USE
The MAGICFX
®
SMOKEBUBBLE BLASTER is designed for outdoor use and use in well-
ventilated indoor spaces.
WARNING
Do not use the MAGICFX
®
SMOKEBUBBLE BLASTER in poor
ventilated confined spaces. Exposure to high levels of smoke can
cause skin irritation and may obscure visibility.
2.3
RIGGING
Please follow the European and national guidelines for safe rigging and trussing.
