7
Getting started
Connecting multipacks
If you have purchased a multiple pack, this process
will need to be carried out for all handsets and
chargers
1. Plug the mains power cable with the red
connector into the socket marked
on the
underside of the charger.
Battery low warning
If the
icon fl ashes in the display, you will need to
recharge the handset before you can use it again.
During charging, the
icon in the display will scroll.
Battery performance
In ideal conditions, fully charged batteries should give
about 10 hours talk time or 100 hours standby time
on a single charge.
Note that new batteries do not reach full capacity until
they have been in normal use for several days.
To keep your batteries in the best condition, leave the
handset off the base for a few hours at a time.
Running the batteries right down at least once a week
will help them last as long as possible.
The charge capacity of rechargeable batteries will
reduce with time as they wear out, giving the handset
less talk/standby time. Eventually they will need to
be replaced.
Batteries and handset may become warm during
charging. This is normal.
Date and time
Providing you have subscribed to your network’s Caller
Display service, the date and time is set automatically
for all handsets every time a call is received.
If you do not subscribe to the Caller Display service
you can set the date and time manually.
Set date and time manually
1. Press
‘menu/ok’
and scroll to
CLOCK/
ALARM
. Press
‘menu/ok’
. Display shows
DATE
& TIME
, then press
‘menu/ok’
.
2. Enter the date using the format DD-MM e.g.
04-08
for 4th August.
3. Press
‘menu/ok’
and enter the time using the
24 hour format HH-MM, e.g.
14-45
for 2.45pm.
4. Press
‘menu/ok’
to confi rm or
to return
to standby.
Your Colombo is now ready for use.
Colombo UG.indd Sec1:7
Colombo UG.indd Sec1:7
24/7/08 17:27:03
24/7/08 17:27:03
