Pronto 100 ID Card Printer – User Guide
31
Error code 4:8
Reason:
While feeding a card from the hopper, and having seen the card reach the mid sensor, it took too
long to clear the rear sensor by rewinding the feed motor.
Error code 4:9
Reason:
While moving the card forwards to feed into the flipper, it took too long for the card's leading edge
to block the front sensor.
Error code 4:13
Reason:
While moving the card from the front sensor to the standby position, it took too long for the front
sensor to unblock.
Error code 4:14
Reason:
While moving the card from the rear sensor to the standby position, it took too long for the rear
sensor to unblock.
Error code 4:15
Reason:
While moving a card from the flipper into the smart encoder, it took too long for the smart extract
sensor to trigger. This may mean that there is no encoder actually fitted.
Error code 4:16
Reason:
While moving the card past the front sensor, having seen the card arrive at the sensor and having
moved the card most of the way past that sensor, it took too long for the sensor to unblock.
Error code 4:17
Reason:
While moving the card into position for a printing or encoding operation, it took too long for the
reference edge of the card to move in front of the sensor used for positioning. In the case of extended mono
prints, this means the mid sensor took too long to block. In other cases, this means it took too long for the
rear sensor to unblock.
Error code 4:18
Reason:
While moving the card into position for a printing or encoding operation, it took too long for the
reference edge of the card to move behind the sensor used for positioning. In the case of extended mono
prints, this means the mid sensor took too long to unblock. In other cases, this means it took too long for the
rear sensor to block.
Error code 4:19
Reason:
While trying to eject the card, it took too long for the leading edge of the card to block the front
sensor.
Error code 4:20
Reason:
While trying to eject the card and having seen the leading edge of the card reach the front sensor, it
took too long for the front sensor to unblock.
Error code 4:21
Reason:
While moving the card from the flipper to the standby position, and having seen the card reach the
mid sensor, it took too long for the mid sensor to unblock.
Summary of Contents for Pronto 100
Page 1: ...1 Pronto 100 Card Printer User Guide Document No 5380 Issue 1 03...
Page 18: ...Pronto 100 ID Card Printer User Guide 18 Customising the Settings and Features...
Page 19: ...Pronto 100 ID Card Printer User Guide 19 3 2 1 4 5 6 7 8 9 10 11 12 1 2 3 4 6 8 10 5 7 9 12 11...
Page 41: ...Pronto 100 ID Card Printer User Guide 41 CE Declaration...
