42
1. Option Approaching Method
The word
“
O p t i o n
”
wil l be scrolled on remote screen and the remote will beep, if
buttons
I + II
are pressed for more than 2 sec. at the same time.
The parking lights wi ll flash and the siren wil l chirp once if you have successfully
entered the program ming menu.
2. Option Move Method
To move through t he option li st, use butt on
III
to move up t he list, and use button
IV
to move down the l ist. The option number and its corresponding icon will be
displayed on the remote.
3. Option Set-up Change
Use button
I
to change the set ting of the current opt ion. The current setti ng will be
displayed on the screen.
4. Applying Options to the Main Controller
After set ting all of the options desired, press button
I V
for more than 2 sec. t o
apply t he changes to t he main controller. At t his ti me, communication with the
m ain controller is required. If the process is successful, the word
“
g o o d
”
will be
displayed on the screen.
5. Canceli ng the Option Programming Mode
Pressing buttons
I + II
before applying the changes to the main controll er will
cause t he remote to exit the opt ion program ming mode without saving any
c h a n g e s .
6. Option Set-up Failure
If you are not in range of the vehicle when you try to transm it the option changes
t o the main controller, the word
“
F A I L
”
will be displayed on the screen and the
remote wi ll exit the option programming mode.
Menu Options
Set-up of Main Option
41
You can access Option Table 1 by pressing buttons
I
+
I I
for more than 2 sec. at t he
same time.
Main Op tion T abl e
Option Name
Option Settings
O p t i o n
1-01
1-02
1-03
1-04
1-05
1-06
1-07
Ic on tha t flashes while
setting the option.
Not Use d
Not Used
10 min
Unl ock
Automatic
( P a s s i v e )
R e s e r v a t i o n
Not operating
3 sec
Running for 2 min
U s e d
25 min
Rema in Lock
Reservation is not
available wh en th e
door is open
O p e r a t i n g
5 sec
Run ning fo r 1 min
3 min
Active
R e s e r v a t i o n
8 sec
5 min
12 sec
▶
The red colors are the factory defaults .
▶
When you reach an option number, the option will be displayed on the remote screen.
Note
Button Functio ns Once You are in the Programming Men u
I
I V
I I I
I V
Button
For 0.5 sec
[change the
option setting]
for 2.5 sec
[apply the changed
options to the ma in]
▲
for 0.5 sec
[move to the previous option]
▼
for 0.5 sec.
[move to the next option]
Turbo Mode
Turbo Mode
Remote Start
Run Time
Igni tion cont rol
door Unlock
R e s e r v a t i o n
M e t h o d
Parking lights
flash if door is
open when arm
D i e s e l
Preheating Time
