User Manual
MAGICFX® Stage Flame
Page 15
If you use a gas bottle, ensure that it is
located on a safe flat surface beyond the
reach of other heat sources.
Fit
a propane gas
reducer onto the gas
bottle.
Use
a wrench
to connect the reducer
and ensure that no gas can escape.
Ensure that the gas bottle cannot topple.
This would allow liquid gas to enter the
Stage Flame.
9.
The temperature will
be
rise
d
after the
Stage Flame has been
in
use for a period
of time. So always let the Stage Flame
cool off before replacing the aerosol can.
Always remember that escaping gas can
ignite at high temperatures.
After you have inserted/replaced the
aerosol can, shut the cover of the Stage
Flame and secure the fasteners on the
side.
8.
Screw the aerosol can into the holder until it
is securely locked in place. Ensure that it is
securely in place.
Only replace an aerosol can during a
show when the Stage Flame is set to
“safe
ty
mode”.
Consult the DMX settings to see how the
Stage Flame can be put into “safe
ty
mode”.
7.