MAGIC FX MFX0803, User And Installation Manual

Page: 22 / 36

22 MAGICFX® STADIUMBLASTER — User and Installation Manual
3.7 SETUP MULTIPLE MACHINES IN A SEQUENCE WITH DMX
PowerCon TRUE1 female
5-pole female
PowerCon TRUE1 male
5-pole male
POWER
DMX
1. Connect a power link cable to the power output.
2.
Connect the other end to the power input of the next machine.
3. Connect a DMX cable to the DMX output.
4.
Connect the other end to the DMX input of the next machine.
5.
Use the buttons or a RDM controller to assign DMX addresses, see chapter 1.
6. Repeat step 1 to 5 for each subsequent machine.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final unit in the
control sequence. Using a DMX Terminator improves signal reliability.
3.8 BLAST WITH DMX
1.
Make sure that each prescribed safety zone is free from persons and objects.
2. Activate the Safety address. The FX LED indicator on each machine lights up.
3.
When it’s time to blast, activate the Start address.
4. Enjoy the view!
5. Deactivate the Start address when the hopper is out of confetti,