Magic Chef HMWC50ST, User Manual

Page: 10 / 30

9
OPERATING YOUR APPLIANCE
HMWC50ST: Wine Cooler
 The temperature range of the wine cooler
is for 41°F ~ 64°F (5°C ~ 18°C) +/- 5°F.
 Temperature Recommendations:
Red Wine: 54°F ~ 61°F (12°C ~ 16°C)
White Wine: 43°F ~ 50°F (6°C ~ 10°C)
 The display indicates the average temperature of the appliance at the moment.
Pre-Set Wine Zones
 Press the
▲
or
▼
pads to choose preset storage conditions for either red or white wine. (The
indicator light “Red” or “White” will illuminate accordingly.)
 The programmed temperature for red or white wine will be displayed for a few seconds.
Manual Temperature Setting
 The temperature of the wine cooler can be set anywhere between 41°F ~ 64°F (5°C ~ 18°C) by
pressing temperature up
▲
and temperature down
▼
pads as follows:
1) Press the [SET] pad until you hear a “Beep” sound (approximately 2 seconds).
2) Press the
▲▼
pads to increase or decrease the desired temperature in
increments of one degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:
 To select temperature display between Celsius (°C) or Fahrenheit (°F), press the
▲
pad for
approximately 2 seconds.
HMBC58ST: Beverage Cooler
 The temperature range of the beverage cooler
is for 37°F ~ 54°F (3°C ~ 12°C). +/- 5°F.
 The display indicates the average temperature
of the appliance at the moment.
NORMAL Temperature Setting
 When the appliance is switched on, or the
▲
pad is pressed, the appliance runs on the
temperature setting of 45°F (7°C) .
Manual Temperature Setting
 The temperature of the beverage cooler can be set anywhere between 37°F ~ 54°F (3°C ~ 12°C)
by pressing temperature up
▲
and temperature down
▼
pads as follows:
1) Press the [SET] pad until you hear a “Beep” sound (approximately 2 seconds).
2) Press the
▲▼
pads to increase or decrease the desired temperature in increments of one
degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:
 To select temperature display between Celsius (°C) or Fahrenheit (°F), press the
▲
pad for
approximately 2 seconds.*
The following is applicable to both HMWC50ST and HMBC58ST:
 The indicator will remain ON during refrigeration cycle and will be OFF
during idle cycle.
 To switch the Interior light ON/OFF, press the pad.