10
ENG - 10
Temperature Control and Display
• The temperature in the upper zone and lower zone can be independently controlled
and displayed.
• The temperature in either zone can be controlled between 39
o
F to 61
o
F (4
o
C to 16
o
C).
(The zone temperature may have a tolerance of +/-5
o
F (+/-3
o
C) from the setting
depending on different loading and ambient conditions).
• The temperature control and display, the indicator, the warmer and colder
control pads near the symbol (left side) are for the upper zone of the wine cooler.
• The temperature control and display, the indicator, the warmer and colder
control pads near the symbol (right side) are for the lower zone of the wine cooler.
• The indicator lights for standby and lock, as well as the control pads to
lock and for lighting are for both zones.
Indicator Light
• When lit, the standby indicator light shows that the unit is in “Standby” mode.
• When lit, the lock indicator light indicates that all of the control pads are locked
and no adjustment can be made to that zone.
• When lit, indicates that the corresponding zone is in the refrigeration cycle
(compressor is running). The indicator light will turn off once the desired
temperature is reached.
Standby
• When the unit is plugged in, the display and pads will illuminate for 3 seconds and an
audible beep will be heard. Then the unit will automatically resume its previous
setting from when it was switched off. If the unit was previously in “Standby” mode
when switched off, it will resume in “Standby” mode and the standby indicator
will remain lit.
• You can manually set your unit to “Standby” mode by pressing and holding both the
warmer and
colder buttons of the lower zone control pads for approximately 3
seconds, provided that the control pads are unlocked and no other setting is in
operation (the display does not flash). The standby indicator light will turn on
to confirm “Standby” mode. Repeating this action once more will restart the unit.
OPERATING YOUR APPLIANCE
