10
Operating basics
Turning the recorder ON and OFF
Complete the installation according to the instructions in the “Using your recorder in
a vehicle” section.
Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will automatically start in a few seconds after start-up.
When a GPS fix is established (in GPS enabled models), the
icon will show on
the top-right corner of the screen. The number of vertical bars in the icon indicates
the strength of the signal.
When the recorder is on, press the Power key to switch the LCD screen on/off.
To manually turn the recorder on and off, press and hold the Power key for 2 seconds.
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date
and time settings before you begin recording.
1. Press
to access the Settings Menu.
2. Select
System > Date / Time
and press
3. Select
Automatic
or
Manual
:
When you select
Automatic
, the system will display the time zone setting screen.
Press
/
to select your time zone and press
. The system will set the
correct date and time according to the time zone setting.
When you select
Manual
, the system will display the date and time setting screen.
Press
/
key to adjust the value of the selected field; press
and repeat
Summary of Contents for MiVue 5 series
Page 1: ...User Manual MiVue 5 Series ...
Page 2: ...508 538 ...
