Magellan MG-6060, Programming Manual

Page: 4 / 28

4 Programming Guide
Wireless Transmitter Programming
In the desired zone’s corresponding section, assign the transmitter’s serial number. In sections [058] and [059], assign the 6-digit serial
number of the transmitter that you are using as a wireless doorbell. You can also use these sections to view transmitter signal strength.
System Timers
* 000 = No tone; 001 = Beeping; 002 = Countdown; 003 = Tonality 1; 004 = Tonality 2; 005 = Tonality 3; 006 = Tonality 4;
007 = Radio tuner (MG-6060 only)
Section Serial Number Section Serial Number
[021]
Zone 1: ____/____/____/____/____/____
[029]
Zone 9: ____/____/____/____/____/____
[022]
Zone 2: ____/____/____/____/____/____
[030]
Zone 10: ____/____/____/____/____/____
[023]
Zone 3: ____/____/____/____/____/____
[031]
Zone 11: ____/____/____/____/____/____
[024]
Zone 4: ____/____/____/____/____/____
[032]
Zone 12: ____/____/____/____/____/____
[025]
Zone 5: ____/____/____/____/____/____
[033]
Zone 13: ____/____/____/____/____/____
[026]
Zone 6: ____/____/____/____/____/____
[034]
Zone 14: ____/____/____/____/____/____
[027]
Zone 7: ____/____/____/____/____/____
[035]
Zone 15: ____/____/____/____/____/____
[028]
Zone 8: ____/____/____/____/____/____
[036]
Zone 16: ____/____/____/____/____/____
[037] to [057] Future use
[058]
Wireless Doorbell 1: ____/____/____/____/____/____
[059] Wireless Doorbell 2: ____/____/____/____/____/____
Section Data (value from 000 to 255) Description Defaults
[060]
____/____/____ seconds
Entry delay 1 (
) †
045 secs.
[061]
____/____/____ seconds
Entry delay 2 (
) †
045 secs.
[062]
____/____/____ seconds
Exit delay (
) ‡
060 secs.
[063]
____/____/____ minutes
Bell cut-off time (
) *
004 mins.
[064]
____/____/____ x 15 minutes
No movement time Disabled
[065]
____/____/____ seconds (minimum 10 seconds) Intellizone delay 045 secs.
[066]
____/____/____ seconds
Recent closing delay Disabled
[067]
____/____/____ times Auto-zone shutdown 005 times
[068]
____/____/____ seconds
PGM1 timer Disabled
[069]
____/____/____ seconds PGM2 timer Disabled
[070]
____/____/____ minutes
Power failure report delay 015 mins.
[071]
____/____/____ days Auto-test report Disabled
[072]
____/____/____ rings
Number of rings 008 rings
[073]
____/____/____ seconds TLM fail timer 032 secs.
[074]
____/____/____ seconds
Answering machine override delay 030 secs.
[075]
____/____/____ seconds Delay alarm transmission Disabled
[076]
____/____/____ seconds (maximum 130 seconds)
Delay between dialing attempts
V
020 secs.
[077]
____/____/____ seconds Pager/voice delay 005 secs.
[078]
____/____/____ seconds
Remote panic disarm lock delay 020 secs.
[079]
____/____/____ repetitions Voice reporting message repetitions 003 reps.
[080]
____/____/____ days
Closing delinquency delay Disabled
[081]
____/____/____ (000 to 007 * )
Entry delay audio selection
( )
003
[082]
____/____/____ (000 to 007 * )
Exit delay audio selection
( )
002
[083]
Future use Future use Future use
[084]
____/____:____/____ Hours
Auto-test report time Disabled
[085]
____/____:____/____ Hours
Auto-arm time
( )
Disabled
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[4]
J
[8]
J
[3]
* For UL installations, the Bell cut-off time must be a minimum of 4 minutes; for
cUL installations, the Bell cut-off time must be a minimum of 5 minutes.
V
For UL installations, the number of dialing attempts shall not exceed 10.
† For UL installations, the Entry delay must not exceed 45 seconds.
‡ For UL installations, the Exit delay must not exceed 60 seconds.