manualshive.com logo in svg

Magellan eXplorist 510, User Manual

Share
Download
Magellan eXplorist 510 User Manual Download Page 51

Magellan eXplorist Settings

Magellan eXplorist 510 / 610 / 710 User Manual 

43

Viewing the SW Version, EULA or Copyright 

Information

1. 

Access the Settings Menu.

2. 

Tap on the 

Product Info

 button.

3. 

Tap on the Versions, EULA or Copyright Info 

button.

Formatting the SD Card

1. 

Access the Settings Menu.

2. 

Tap on the 

Navigation

 button.

3. 

Tap on the 

Format SD Card

 button with an SD 

card installed in the receiver.

4. 

Confirm that you want to restore the factory 

defaults.

Connectivity

Setting Receiver Connectivity

1. 

Access the Settings Menu.

2. 

Tap on the 

Connectivity

 button.

3. 

Tap the Mode drop-down menu and select the 

desired connectivity mode.

Diagnostics

Running the Audio Test

1. 

Access the Settings Menu.

2. 

Tap on the 

Diagnostics

 button.

3. 

Tap the Audio Test button.

Running the Video Test

1. 

Access the Settings Menu.

2. 

Tap on the 

Diagnostics

 button.

3. 

Tap the Video Test button.

Language

Selecting Language

1. 

Access the Settings Menu.

2. 

Tap on the 

Language

 button.

3. 

Tap desired language to use.

4. 

Confirm changing the language.

Product Information

Viewing the Receiver Serial Number

1. 

Access the Settings Menu.

2. 

Tap on the 

Product Info

 button.

3. 

The serial number for the receiver is displayed 

at the top of the screen.

Summary of Contents for eXplorist 510




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands