background image

Safety

The Magellan eXplorist is a navigation aid designed to assist you in arriving at your selected 
destination. When using the Magellan eXplorist, these safety rules must be followed to prevent 
accidents that can result in injury or death to yourself or others:

IN THE INTERESTS OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE 
DRIVING A VEHICLE.

Please do not try to change any settings on the Magellan eXplorist while driving. Come to a 
complete stop or ask a passenger make any changes. Taking your eyes off the road is dangerous 
and can result in an accident in which you or others could be injured.

USE GOOD JUDGEMENT

This product is an excellent navigation aid, but does not replace the need for careful orienteering 
and good judgement. Never rely solely on one device for navigating.

USE CARE

The Global Positioning System (GPS) is operated by the U.S. Government, which is solely 

responsible for the accuracy and maintenance of the GPS network. The accuracy of position fixes 

can be affected by the periodic adjustments to GPS satellites made by the U.S. government and 
is subject to change in accordance with the Department of Defence civil GPS user policy and 
the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry and 
obstructions, like buildings and large trees.

USE PROPER ACCESSORIES

Use only Magellan cables and antennas; the use of non-Magellan cables and antennas may 
severely degrade performance or damage the receiver, and will void the warranty.

No part of this guide may be reproduced or transmitted in any form or by any means, electronic 
or mechanical, including photocopying and recording, for any purpose other than the purchaser’s 
personal use without the prior written permission of MiTAC Digital Corporation.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one of the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

Summary of Contents for eXplorist 350H










































Reviews: