Setting User Options
42
Setting User Options
Overview
Portions of the Magellan CrossoverGPS can be customised to your needs. To access the
User Options menu, select
Options
from page 2 of the Main Menu and select the option
you want to change.
POI Selection
In POI Selection you can select which POI icons you wish to display on the Map screen
Check the POI category name to select or deselect it. POIs with an “X” will be
displayed on the screen. Use ‘Mark All’ or ‘Clear All’ for global selections.
NOTE - Marine and Outdoor use: When you have added maps using Magellan
BlueNav or Magellan MapSend Topo the POI category list will be created from the
categories supplied on the optional maps. With no accessory map installed, the
POI list will be empty for marine use and will contain the vehicle navigation POI
list for outdoor use.
Address Book Options (Waypoint Options for Marine and Outdoor use)
This option provides a way to quickly clear addresses from your address book.
Clear Addresses
clears all of the addresses in your address book.
Clear Favourites
clears the addresses marked as favourites from your address book.
Clear Previous
clears the previous destinations list.
Active Track Options (Marine and Outdoor use only)
Track is a recording of your journey on land or water. Active Track Options sets some of
the parameters for the active track.
Continue Track on Application Start:
You can set the track to continue from the
last track point set automatically (Yes), have a new track started and the old track
deleted every time you start (Reset), or set it to ask you if you want to continue the
track every time you start the outdoor/marine application (Ask).
When track is full:
When the track memory is full you can set the Magellan
CrossoverGPS to keep adding new track points to the end of the track and delete
