NOTE
：
When taking down tent, ensure to unplug USB.
Assembly Instructions
Page 6 of 8
FIGURE 3
Step 3:
●
Spread out the rainfly and find the side with
Logo as the front. Two people each pull the
rainfly any part, then drag it over the top of
the tent.
(Fig.3)
.
●
Hook the S-hook at the bottom of the rainfly
into the D-ring at the bottom of the tent body.
(Fig.4)
●
Your tent should be standing up completely.
You can now easily move your tent to its final
position before securing with stakes and
guylines.
FIGURE 5
FIGURE 6
FIGURE 4
5
6
Two sides
Lighting Component for tent
Slide battery pack into
pocket located at the
inside of tent.
Velcro up pouch, then plug in battery pack
cord into lighting connector.
Press buttons on switch box located at the
inside of tent to turn on/off the lighting.
AA
AA
AA
Load 3AA batteries to
empty battery pack.
(Batteries not included)
