Operation
Step 1:
Turn Control Knob counter-clockwise until a click is heard, which means a spark has been
produced and burner should ignite.
Step 2:
Adjust flame to desired height by continuing to turn Control Knob in a counter-
clockwise direction. Flame should be blue with a hint of yellow tip.
IF STOVE DOES NOT LIGHT, turn Control Knob back to “OFF” position and repeat previous step.
After 3 failed attempts to light stove, turn the gas supply off by turning the control knob clockwise
to “Off” position and return the Canister Lever to “Unlock” position. Open door, remove canister
and shake gently to verify that it is not empty.
CAUTION: Allow stove to cool completely before replacing canister.
Follow directions carefully to prevent accidental fire.
Step 3:
To turn off, turn Control Knob in a clockwise direction to “OFF” position.
THE STOVE IS EQUIPPED WITH A SAFETY DEVICE which stops the flow of gas if pressure in
the cartridge becomes too high, overheats, or malfunctions.
Cleaning and Storage
Step 1:
Allow burner and cooking surfaces to cool completely.
Step 2:
Remove butane canister.
Step 3:
Wipe down cooking surfaces with soap and warm water and soft cloth.
Use a stiff brush to clean burner head.
Step 4:
Allow stove to dry thoroughly before storage.
Step 5:
Never store stove with butane cylinder attached.
Step 6:
No other maintenance is necessary.
WARNING
When opening your stove, please ensure that the drip pan (pan support) is turned right side up. Currently the drip pan
is up side down for storage purposes.
CORRECT
UPSIDE DOWN (PACKED)
REMOVED
Page 5 of 6
