6.2.1
Making Private Calls
Procedure:
1
To select a channel with an active subscriber ID, toggle the
Channel Selector
knob.
2
To call, press the
PTT
button.
3
Wait for the Talk Permit Tone to end, and speak into the microphone.
4
To listen, release the
PTT
button.
If your radio does not detect voice activity for a predetermined period, the call ends.
6.2.2
Responding to Private Calls
When and where to use:
When you receive Private Calls, your radio shows the following indications:
• The yellow LED illuminates.
• Your radio unmutes and the incoming call sounds through the speaker.
Procedure:
1
To respond, press the
PTT
button.
2
Wait for the Talk Permit Tone to end, and speak into the microphone.
3
To listen, release the
PTT
button.
If your radio does not detect voice activity for a predetermined period, the call ends.
6.3
All Calls
All Calls are one-way calls from an individual radio to all radios on a channel. All Calls are used for
making important announcements.The recipients on the channel cannot respond to All Calls.
When you receive All Calls, your radio shows the following indications:
• A tone sounds.
• The yellow LED illuminates.
• Your radio unmutes and the incoming call sounds through the speaker.
All Calls do not wait for a predetermined period before ending. You can only continue with programmed
button functions after the All Call ends. If you switch to a different channel during an All Call, your radio
stops receiving the call.
6.3.1
Making All Calls
Procedure:
1
To select a channel with an active group ID, toggle the
Channel Selector
knob.
2
To call, press the
PTT
button.
3
Wait for the Talk Permit Tone to end, and speak into the microphone.
MN007942A01-AA
Chapter 6 : Calls
19
