C & D F l a s h l i g h t
ML Rev.1 8/03
13
421-000-391
STEP 13
REPLACE THE SWITCH
Make sure the switch button is depressed.
Insert the Switch Assembly (13) into the
front of the barrel (16).
STEP 15
Insert the proper hex wrench (23) or (24)
for “D” into the switch button (A),
through the switch and into the set
screw (22). Center the switch button and
tighten the set screw (22).
STEP 14
Line up the switch button on the Switch
Assembly (13) with the switch hole in the
barrel (16) and push the Switch Assembly
(13) in until it stops.
STEP 12
Pull the Switch Assembly (13) out the front
of the barrel (16).
