8
Hornet Line Array User Manual rev 0.1
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
4.1. System operation - Rigging
Hornet Line Array systems are equipped with built-in rigging hardware allowing for quick
installation/dismantling times. Additional accessories include wheel carts for easy transportation.
Rigging must be performed only by trained personnel following the established safety rules.
MAXIMUM WEIGHT RESTRICTIONS MUST BE FOLLOWED AT ALL TIMES!
MAKE SURE THE SUPPORT STRUCTURE IS CAPABLE OF HOLDING THE APPLIED WEIGHT
WHILE SUSPENDING THE SYSTEM!
HORNET 12 rigging hardware operation guide
HORNET 12 rigging hardware
1
4
2
3
5
6
7
1. FRONT ROD HANDLE. Push the handle and rotate to move
the front rod into connecting position, or to retract it for
transportation.
2. DOLLY HANDLE. Push this handle backwards to release locks
to attach the dolly to cabinet, or push the handle frontwards to
secure dolly for transportation.
3. FRONT PIN SOCKET. Use VA-0018 pin to secure connection
to bottom cabinet’s front rod with this socket.
4. CONNECTION PIN STORAGE. Storage places for VA-0018
pin while transporting.
5. REAR ROD ANGLE SOCKETS. Use VA-0018 pin to secure
the read rod’s angle after being selected with [6]. DO NOT
SUSPEND CABINETS WITHOUT REAR ANGLE BEING
SECURED WITH VA-0018 PIN!
6. REAR ROD ANGLE SELECTOR. Push and slide this handle to
select the needed connection angle between cabinets. Secure
the angle with [5]. DO NOT SUSPEND CABINETS WITHOUT
REAR ANGLE BEING SECURED WITH VA-0018 PIN!
7. REAR PIN SOCKET. Use VA-0018 pin to secure connection to
bottom cabinet’s rear rod with this socket.
