P1cc
11/2021
13
6.
When inserting the new jigsaw blade, ensure
that the new blade locks into place by itself.
7.
Push the clamping lever (2) back to its original
position to close it.
✓
The saw blade is changed.
Fig. 4: Replacing the saw blade
4.5
Base plate
The machine is equipped with a base plate that permits precise rectangular cuts to be made.
Use the following procedure to remove the base
plate:
1.
Rotate the clamping lever (5) from the horizontal
to the vertical position.
➢
This releases the connection between the
machine and the base plate.
2.
Move the base plate until the pointer position on
the machine meets the notch in the base plate.
3.
You can now separate machine and base plate
from each other.
✓
Base plate removed.
Fig. 5: Removing the base plate
Use the following procedure to put the base plate
back on:
1.
Ensure that the clamping lever (5) is in the
vertical position
2.
Connect machine and base plate such that the
pointer on the machine and the pointer on the
plates are one above the other.
3.
Move the base plate in the desired direction with
respect to the machine
4.
Rotate the clamping lever (5) to the horizontal
position to fasten the base plate at the machine.
✓
Base plate mounted.
Fig. 6: Mounting the base plate
Replace the base plate with the swivel plate, which is available as a special accessory, if you want to make
precise angle cuts.
