-16-
2.3 Technical data
Universal motor, radio and TV interference
suppressed
230 V~, 50 Hz or 110 V~, 50 Hz
Power input (nominal load)
1100 W (230 V) or 1100 W (110 V)
Current at nominal load
4.8 W (230 V) or 10 W (110 V)
Saw blade speed during idling
4400 rpm or 4200 rpm
Saw blade speed at normal load
2770 rpm or 2650 rpm
Cutting depth 0°/30°/45°
55/50/42 mm ( 2 3/16 / 1 15/16 / 1 ¾ in. )
Swivelling saw unit
0 - 45°
Saw blade diameter max/min
160/149 mm ( 6 ¼ / 5 ¾ in. )
Largest thickness basic saw blade body
1.2 mm ( 3/64 in. )
Tool cutting width
1.8 mm ( 5/64 in. )
Saw blade mounting hole
20 mm
Hose connector diameter
35 mm ( 1 3/8 in. )
Weight without mains cable
3.7 kg (8.1 lbs)
Dimensions (W x L x H)
253 x 309 x 235 mm ( 9 7/8 x 12 1/8 x 9 1/4 in.)
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Workplace-related emission value
Idling
103 dB (A)
92 dB (A)
Machining
104 dB (A)
93 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.6 Scope of supply
Portable circular saw MS 55 complete with:
1 carbide-tipped circular saw blade Ø 160 mm ( 6 ¼ in. ), 16 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 connecting cable
1 service tool in bracket on the machine
1 operating manual
1 folder “Safety Instructions”
