-15-
2.3
Technical data
Universal motor, radio and TV interference suppressed
230 V~, 50 Hz
120 V~, 60 Hz
Input power continuous operation
2500 W
Current at nominal load
13 A
20 A
Idling speed
4050 rpm
Mortising depth
100 mm (3 15/16 in.)
Mortising depth with guide support stand FG 150, order No. 200
980
150 mm (5 7/8 in.)
Weight without mains cable LS 103 Ec
8,7 kg (19.18 lbs)
Weight guide support stand FG 150, order No. 200 980
4.6 kg (10.1 lbs)
2.4
Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be
used for comparing the tool with another and also in a preliminary assessment of exposure.
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
2.4.1
Noise emission specifications
Noise emission values determined according to EN 62841:
Sound power level
Workplace-related emission value
Idling
108 dB (A)
97 dB (A)
Machining
108 dB (A)
97 dB (A)
2.4.2
Vibration specifications
The typical hand-arm vibration is 5.1 m/s
2
.
2.5
Scope of supply
Single-phase chain mortiser LS 103 Ec complete with:
1 guide rail, cpl.
1 mortising chain
1 chain wheel
1 crossfeed stop
2 operating tools
1 operating manual
1 folder “Safety Instructions”
2.6
Use according to intended purpose
The single-phase chain mortiser is exclusively
intended for mortising solid wood using mortising
chains. The dimensions of the mortising chain sets
used (guide rail, mortising chain and chain wheel)
must correspond to the mortising chain sets listed in
the operating instructions.
