![background image](http://html.mh-extra.com/html/mafell/k55cc/k55cc_operating-safety-instructions-manual_689046016.webp)
K55cc/KSS50cc
16
01/2022
4.4
Saw blade selection
To achieve good cutting quality, use a sharp tool and select a tool from the following list that is appropriate for
material and application:
Cutting softwood and hardwood across and along the grain direction:
-
Carbide circular saw blade Ø 168 x 1.8 x 20 mm, 24 teeth [Ø 6.61 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially along the grain direction:
-
Carbide circular saw blade Ø 168 x 1.8 x 20 mm, 16 teeth [Ø 6.61 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially across the grain direction:
-
Carbide circular saw blade Ø 168 x 1.8 x 20 mm, 32 teeth [Ø 6.61 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially across the grain direction "fine cuts":
-
Carbide circular saw blade Ø 168 x 1.8 x 20 mm, 56 teeth [Ø 6.61 x 0.07 x 0.79 in]
Cutting wood fiber insulation material:
-
Carbide circular saw blade Ø 168 x 1.8 x 20 mm, 56 teeth [Ø 6.61 x 0.07 x 0.79 in]
Cutting plastic material (styrofoam):
-
Carbide circular saw blade Ø 168 x 1.8 x 20 mm, 24 teeth [Ø 6.61 x 0.07 x 0.79 in]
4.5
Changing the saw blade
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
➢
Wear protective gloves when you change the saw blade.
➢
Be careful when you change the saw blade.
Use the following procedure to change the saw
blade:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Put the disconnected machine on a flat
surface.
4.
Press and hold the pushbutton (7).
5.
Pull the locking lever (3) upwards.
➢
The operating lever is locked. The
mechanism that locks the saw shaft is
activated.
Fig. 7: Locking the saw shaft