-24-
3
Safety instructions
Danger
Always observe the following safety instructions and the safety regulations applicable
in the respective country of use!
General instructions:
-
Children and adolescents must not operate this machine. This rule does not apply to young persons
receiving training and being supervised by an expert.
-
Never work without the portal system guards into which the power tool is inserted and that are prescribed for
each operation. Do not make any changes to the portal system and the power tool that could compromise
safety.
-
Damaged cables or plugs must be immediately replaced. Replacement may only be carried out by Mafell or
an authorised MAFELL service workshop in order to avoid safety hazards.
-
Avoid sharp bends in the cable. Do not wind the cable around the power tool especially when transporting
and storing the power tool.
-
The use of the power tool with water or conductive liquids is prohibited.
-
We exclude the use as hand-guided power tool.
-
Keep the power tool away from rain or moisture. The penetration of water into a power tool increases the
risk of electric shock.
Do not use:
-
Damaged tools or tools that have changed their shape.
-
Blunt tools due to the excessive motor load.
-
Tools that are not suitable for the power tool speed during idling.
Instructions on the use of personal protective equipment:
-
Always wear ear protectors during work.
-
Always where a dust mark during work.
-
Always wear protective goggles during work.
Instructions on operation:
-
Do not reach with your hands into the danger zone of the tool.
-
Examine the workpiece for foreign objects.
-
Monitor the speed. If an uncontrolled speed increase or speed jump occurs, the power supply must be
switched off immediately.
Instructions on service and maintenance:
-
Regular cleaning of the power tool is an important safety factor.
-
Only original MAFELL spare parts and accessories may be used. Otherwise, the manufacturer will not
accept any warranty claims and cannot be held liable.
