![background image](http://html2.mh-extra.com/html/mafell/ddf-40/ddf-40_operating-safety-instructions-manual_3417092025.webp)
DDF40
01/2022
25
5.4.5
Drilling with position indicator
Use the following procedure to install the position
indicator:
1.
Loosen the wing screw (3) for the height
adjustment.
2.
Using the setting wheel (7), move the swiveling
guide fence (1) all the way up.
Fig. 28: Moving the swiveling guide fence all the way up
3.
Clip the position indicator on the columns of the
height guide.
4.
Move the position indicator upward towards the
swiveling guide fence until it locks into place at
the swiveling guide fence.
✓
Position indicator mounted.
Fig. 29: Mounting the position indicator on the machine
Using the setting wheel (7), the distance at the position indicator can be adjusted continuously in a range
between 19 and 60 mm [0.75 - 2.36 in] with respect to the drill axis.
5.4.6
Drilling with hose connector
Use the following procedure to install the hose
connector:
1.
Clip the hose connector into the opening on the
lateral surface.
2.
Press the hose connector forward to lock it.
➢
Take note of the icons on the hose
connector.
✓
Hose connector mounted.
Fig. 30: Mounting the hose connector on the machine
5.5
Working with special accessories
Various special accessories are available for the machine. An overview can be found in chapter 8 Optional
accessories.
Some utilization methods are explained below.