-18-
5.3
Storage
If the machine is not in use over a longer period of
time, it must be carefully cleaned (refer to chapter
5.1). Spray plain metal parts with an antirust agent.
Only store the machine in dry rooms and protect it
against atmospheric influences
6
Troubleshooting
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
7
Optional accessories
³
Additional handle (BS / 12 V)
Ref. No. 094 416
³
Interchangeable batterie 12 V 2.0 Ah (BS / 12 V)
Ref. No. 094 404
³
Interchangeable batterie 18 V 2.0 Ah (BS / 18 V)
Ref. No. 094 402
The determination of the causes of existing defects and their eliminations always require
increased attention and caution. It is imperative to remove the battery from the machine before
carrying out any troubleshooting (refer to section 4.3).
Defect
Cause
Elimination
Machine cannot be switched on
Empty battery
Charge battery (refer to section 3.1)
Carbon brushes are used up
Replace the carbon brushes
(refer to section 5.2)
Crosswise changeover slider in centre
position (starting lock-off)
Press the crosswise changeover slider
to the left for clockwise rotation
Press the crosswise changeover slider
to the right for anti-clockwise rotation
Summary of Contents for BS 18 V
Page 3: ...3 Abb 1 Fig 1 ill 1 afb 1...
Page 47: ......