9
Copyright © madVR Labs, LLC. All rights reserved.
4.4.
Envy does not power on:
Check the power supply switch and make sure the “circle”
side of the switch is up in the air (“line” is pressed down), as pictured in Appendix A.
4.5.
Green flashes:
You may notice a full screen green flash or two during HDMI signal
changes / handshaking in some situations. In the Display Output mode use RGB if
using YUV. Or if using YUV, choose Slow and Clean Handshakes in the Envy HDMI
Configuration menu.
4.6.
Audio delay:
Envy adds audio delay as part of its processing. Please see Section 3.7
for information about setting the audio delay.
4.7.
Something else?
Please contact your authorized Envy dealer for assistance.
We hope you enjoy your Envy as much as we enjoyed making it for
you! Thank you.
