5
madVR Envy
–
JVC Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.
4.
Next, we create the Picture Mode that contains all the settings we want the JVC to use when the
Envy is playing HDR content. Shown below is an example where the User4 Picture Mode was
renamed to “SDR
-
BT2020”. On this menu page, choose the 6500K for the color temperature, or
whatever color temperature setting you have calibrated. Generally, the recommended Gamma
Setting for use with Envy HDR dynamic tone mapping is 2.4, when not performing a 3D LUT.
Important
: If you set the Gamma to something other than 2.4, be sure to change the Transfer
Function setting in t
he Envy’s Display Calibration menu to match the Gamma setting selected
here. See Appendix A for information on how to set this in the Envy menus.
5.
When you select the “
Color Profile
” option shown above, it will list the available options, as
seen below. You should select
BT.2020
if you wish to use the DCI P3 Cinema Filter (not present
in the RS1000/NX5), or
HDR
if you do not want the filter to be used (to gain a little extra
brightness at the expense of a somewhat narrower color gamut for BT2020 content).
