background image

 

Disclaimer 

 

Neither MadStad Engineering nor its owners shall be liable for any 
damages, consequential or inconsequential, resulting from the use of 
our products. Installation of any of our products constitutes acceptance 
of these terms.  

It is the responsibility of the user to make sure all fasteners are 
tightened securely, the windshield is mounted properly and the 
adjustment knobs are tightened snugly before putting the motorcycle in 
motion. MadStad systems ARE NOT intended to be adjusted while the 
vehicle is in motion; you must pull over out of the way of traffic and 
come to a complete stop before making any changes. The user must 
never place the windshield in such a position as to interfere with the 
safe and complete movement of the handlebars and controls. 

 

Returns and Warranty 

If you are not satisfied with your new windshield system you have 30 
days to return it. Full details are available on our web site at 

www.madstad.com

. If purchased from a dealer then please contact the 

dealer for their return policy. 

 

MadStad adjustable brackets carry a lifetime warranty against 
manufacturing defects. This does not include cosmetic issues nor any 
parts that inherently wear out or degrade over time such as rubber and 
plastic parts. Windshields, deflectors and other similar plastic parts are 
warrantied for 1 year against manufacturing defects, not against 
cosmetic issues or issues related to normal wear and tear. 

 

 

 

 

 

Summary of Contents for Robo Knob









Reviews: