7
Operating Voltage
The PLS-330 is set at the factory (internally) for 100V, 120V, 220V, 230V, or 240V AC
mains operation at either 50 or 60Hz. (
230V/50Hz only in European Union coun-
tries, in compliance with CE regulations.
) This voltage setting cannot be changed
by the user. Make sure that the label on the rear panel of the PLS-330 (above the
AC cord) indicates the correct AC operating voltage for your location.
If the voltage indicated on your PLS-330 is incorrect, or if you wish to change the
AC operating voltage of your Nº30.6/PLS-330 as the result of moving to a different
country than the one in which you purchased your digital audio processor, see
your Mark Levinson dealer.
The Nº30.6/PLS-330 can be powered by a normal 15-ampere AC mains line. If
other devices are also powered from the same AC line, their additional power
consumption should be taken into account.
For optimal sonic performance and longevity, the Nº30.6 is designed to remain
powered at all times (the
standby
switch merely mutes the processor’s outputs
and turns off the display). There is an initial break-in period of approximately
300 hours before the Nº30.6 achieves optimum performance.