![background image](http://html1.mh-extra.com/html/madrigal-audio/mark-levinson-n-30-6/mark-levinson-n-30-6_operating-manual_3355183023.webp)
23
4
left analog dc
out
right analog dc
out
50 – 60HZ
90 – 110VAC
~
~
~
105 – 125VAC
180 – 220VAC
210 – 240VAC
230 – 250VAC
~
~
~
operating voltage:
WARNING:
BEFORE ATTEMPTING TO OPERATE
THIS DEVICE, REFER TO OWNER'S MANUAL FOR
PROPER OPERATING INSTRUCTIONS AND SAFETY
PRECAUTIONS. HAZARDOUS VOLTAGE AVAILABLE
INSIDE; DISCONECT AC ~ MAINS CABLE BEFORE
REMOVING COVER.
digital dc
out
1
3
1
2
Rear panel, PLS-330
1
RIGHT ANALOG DC OUT, LEFT ANALOG DC OUT
These outputs, one for each channel, provide DC power to the Nº30.6 (via
the supplied cables equipped with five-pin connectors).
Connect the left channel’s
analog dc in
on the rear panel of the Nº30.6 to
the
left analog dc out
on the rear panel of the PLS-330; likewise, connect
the right channel’s
analog dc in
on the rear panel of the Nº30.6 to the
right
analog dc out
on the rear panel of the PLS-330.
2
DIGITAL DC OUT
This output provides DC power to the Nº30.6 (via the supplied cable
equipped with two-pin connectors).
Connect
digital dc in
on the rear panel of the Nº30.6 to the
digital dc out
on the rear panel of the PLS-330.
3
AC POWER CONNECTOR (ON BOTTOM)
This input accepts AC power from the AC mains (via the supplied AC
cable). Connect the female end of this cable to the PLS-330. Connect the
male end of this cable to wall outlet or to an “unswitched” convenience
outlet like those found on many audio components.
AC power cord polarity
To PLS-330
To AC mains
1
3
2
1
2
3
1
= Line (hot)
2
= Neutral
3
= Earth ground