![background image](http://html1.mh-extra.com/html/madrigal-audio/mark-levinson-n-30-6/mark-levinson-n-30-6_operating-manual_3355183018.webp)
18
PUSH
PUSH
PUSH
right channel
analog output
balanced analog
output
analog dc in
left channel
analog output
balanced analog
output
analog dc in
digital
dc in
1
2
3
4
5
6
7
8
digital inputs
master
RS-232
electrical
digital outputs
optical
electrical
rec
monitor
rec
optical
balanced analog
output
balanced analog
output
communication
ports
control ports
PHASTLink® compatible
REFERENCE DIGITAL PROCESSOR Nº30.6
d e s i g n e d a n d m a n u fa c t u r e d i n U. S. A .
by
MADRIGAL S/N
4
4
5
6
7
10
11
12
2
1
8
9
3
Rear panel, Nº30.6
1
SINGLE-ENDED ANALOG OUT
These outputs provide single-ended line-level analog audio (via cables
equipped with RCA-type connectors) to a preamplifier, integrated amplifier,
or receiver.
2
BALANCED ANALOG OUTPUTS
These outputs provide balanced line-level analog audio (via cables
equipped with XLR-type connectors) to a preamplifier, integrated amplifier,
or receiver equipped with balanced inputs (see “Set-up and installation”).
The pin assignments used are AES-standard, as shown below:
Male XLR output
connector (digital)
1 2
3
Pin 1: signal ground
Pin 2: non-inverting signal
Pin 3: inverting signal
Connector ground lug: chassis ground
3
PHASTLINK
®
CONTROL PORTS
In addition to the Mark Levinson Linking system described above, the
Nº30.6 can, as an extra-cost option, support the PHASTLink
®
communica-
tions system. This system is designed to facilitate complete systems integra-
tion with PHAST
®
controllers. For more information on PHAST
®
(a division
of AMX
®
), please refer to the internet at
http://www.phast.com.
4
ANALOG DC IN
These inputs, one for each channel, accept DC power from the PLS-330 (via
the supplied cables equipped with five-pin connectors).