14
15
GT FREEDOM
CAUTIONS
•
After cleaning is completed, put the robot in the cooling dry place against
direct sunlight.
•
The robot becomes heavier when filled with water. Pay special attention when
lifting it out of the water, wait till water drains out from it.
IMPORTANT
•
After settings are done, please drop the robot into the water within 3 minutes,
or the robot will enter into the sleeping mode.
•
Clean the filter basket after cleaning cycle, please avoid cleaning the surface
of the filter box directly with your hands.
•
The robot has a safety feature that automatically stops if a dry run happens.
•
Move the robot slightly in all directions so that the air contained in the robot
escapes, and the robot can go down into the water easily. Showed below.
OPERATION
S E CT I O N 2
On/Off
Cleaning
Time
Cleaning
Mode
AI Mode
Error Code
2.1
Introduction of button
Type of button
Icon
Display Status
Description
Power switch
Green light flashes
Setup status
Green light being on
Running status/Inspection status
under water
Cleaning time setup
1 green light being on
Cleaning time: 0.5H
2 green lights being on
Cleaning time: 1.0H
3 green lights being on
Cleaning time: 2.0H*
All lights being off
Cleaning until low battery
Cleaning mode
Triangle green light in the
floor being on
Floor cleaning mode
Both Triangle green lights
being on
Overall cleaning mode
(Floor, wall, waterline)
AI Mode
1 green light being on
Cleaning every 24 hours
2 green lights being on
Cleaning every 48 hours
3 green lights being on
Cleaning every 72 hours
All lights being off
Do not need AI Mode
Error code
1
Left drive failure
2
Right drive failure
3
Abnormal water pump
4
Abnormal Control panel
communication
5
Infrared sensor anomalies
6
Abnormal water sensor
Battery
Indicator
Wi-Fi
Signal
