Product User Guide
6
1.
Connect the RFC1000 wireless transceiver (sold separately) to the Windows PC with the
provided USB cable.
2.
Additional RFC1000’s can be used as repeaters to transmit over greater distances. If
transmitting over a distance greater than 500 feet indoors, 2,000 feet outdoors or there are
walls, obstacles or corners that need to be maneuvered around, set up additional RFC1000’s
as needed. Plug each one into an electrical outlet in the desired locations.
3.
To activate the wireless mode, flip the black switch on the back of the Therm•A•lert to the
'On' position. (0 is 'Off', 1 is 'On').
4.
On the Windows PC, launch the MadgeTech 4 Software.
5.
All active data loggers will be listed in the Device tab within the Connected Devices panel,
showing that the data loggers are recognized.
6.
To claim a data logger, select the desired data logger in the list and click the
Claim
icon.
7.
Once the data logger has been claimed, select a start method in the Device tab.
Activating & Deploying the Data Logger
Alarm Settings/Rules in the MadgeTech 4 Software
1.
To create an alarm rule, select
Manage Rules
in the device tab of the software.
2.
Select
New
and enter a Rule name. Enter alarm parameters using the drop down menus and
selection circles.
3.
Select
OK
and choose the alarm to enable. The alarm bell is green when enabled and red
when disabled.