6. Click the
Install driver for PCI Adapter 802.11b (95-20)
link to run the setup program. Now go to
Step 9.
7. If the AutoPlay capability of the CD-ROM drive is disabled, click the
Start
button on the taskbar,
click
Run
, and then the
Run
dialog box appears.
8. In the
Open
text box, type in
D:\Setup.exe
(where D: is the CD-ROM drive letter) to run the above
setup program. Now go to step 5.
9. The welcome dialog box appears. Click
Next
to continue.
10. The
Software License Agreement
dialog box appears. Read through the Software License
Agreement, and then click
Yes
.
11. The setup program will automatically identify the running system, install corresponding software, and
configure your system for the PCI adapter.
12. Following the completion of software driver setup, the
Setup Complete
dialog box appears.
13. Click
Finish
to complete the software setup.
5 Hardware
Setup
After software setup, follow the steps below to install your PCI adapter hardware.
1. Before installing your PCI adapter, power off your computer and remove the power plug from the
wall outlet.
2. Remove the cover of your computer. For instructions on removing the cover, refer to the manual
provided the vendor of your computer.
3. Install the PCI adapter into a free PCI slot and utilize the mounting screw to secure the PCI adapter in
place.
4. Re-place and secure the cover of your computer.
5. Re-connect the power plug back to the wall outlet and power on your computer.
6
Inserting the Madge PCMCIA 802.11b Adapter
It is important to insert any PC Card correctly into the PCI adapter. Do not use excessive force. The PCI
adapter is supplied with warning labels to show the correct insertion of a Madge PCMCIA 802.11b
100-409-01
Copyright © 2002 Madge Networks. All rights reserved.
Page
3
