background image

User’s Manual for Xplore

 

Version 2.53 - Version date: 15.02.2022 

Page 

5

 of 

46 

 

 

Precautions for use 

No studies have reported negative effects or side effects from using Xplore.  

Risk analysis shows that users with one or more of the following conditions should consult their 
doctor or therapist before starting to use the product to evaluate if benefits of use outweigh 
possible risks of injury or negative side effects: 

  Major deformities (spine and lower limbs) 

  Severe or fixed contractures in the lower limbs (Hip and knee flexion contractures >40°, pes 

 

equinus >25°)  

  Osteoporosis with previous or suspected spontaneous fractures of the lower extremities  

  Joint instability in the lower limbs (hips, knees, and ankles) 

  Circulatory disorders  

  Respiratory disorders  

  Cardiac disorders  

  Epilepsy with uncontrollable grand mal fits   

  Severe spasticity interfering with positioning and movement in the product 

  Pain while in standing weight-bearing position or when moving lower limbs 

 

 
 
 

Training and Assistive Persons 

Before the product is used, the supervisor must have received training (in accordance with Appendix 
1) from an Made for Movement representative to monitor use and provide the user with any 
necessary assistance. The representative is usually a Made for Movement employee or a distributor / 
doctor / therapist who is appropriately trained and officially approved to work with the product. 
 
The training includes a demonstration of all key features, transfer, attachment, safety, use and 
troubleshooting as described in Appendix 1. In addition, the instructions for use must be read, 
understood, used and retained for future reference. 
 

 

Important:

 The settings of the product must not be changed in any other way than 

described in these operating instructions. Furthermore, the product may only be adjusted by an 
Made for Movement representative who have been trained in the adjustment of the product. 

 
 
 

Summary of Contents for Xplore




















































Reviews: