background image

User’s Manual for Xplore

 

Version 2.53 - Version date: 15.02.2022 

Page 

23

 of 

46 

 

 

8.

 

Using the Xplore 

 

8.1.

 

Duration of use 

Duration of use of the Xplore will depend on the user's physical and mental heal

th. The user’s 

healthcare professionals are responsible for assessing this. 

 

8.2.

 

Training 

The following assumes that

 

the Xplore has been adapted to suit the user by a Made for 

Movement representative or another qualified person. The people assisting the user in the Xplore 

MUST

 have received the necessary training in the use of the product and have read and 

understood the contents of this manual. Appendix 1 should be used to ensure that all safe use 
aspects have been covered during the training. The information below explains how to get a user 
in and out of the Xplore. 

 

8.3.

 

Shoes 

The Xplore must be used while wearing shoes. You should also check that the shoes fit well when using the  
Xplore. Do not use sandals. 

 

8.4.

 

Preparations before use 

Place the Xplore on a flat surface and apply the brake by pressing the brake lever down (push the 
lever up to release the brake). Ensure that all the buckles are open before transferring the user to 
the Xplore. Check that the seat is at the correct height. Check that all the supports and seat are 
properly  tightened. 

 

8.5.

 

How to get the user into the Xplore 

There are 3 main ways of getting the user into the Xplore: some assistance/lifting, by transferring the 
user or by using a sling/harness. Common to all these methods is that the user is transferred to the 
seat of the Xplore. For the smallest and lightest users, it is usually easiest to lift the user to the seat. 
Heavier users can be assisted from standing over to the seat if their functional abilities allow such.. 
For heavier users, it may be appropriate to use a personal lifter or hoist in order to ensure safe and 
comfortable transfer for both the user and the assistant.. 

 

8.6.

 

Securing users in the Xplore 

When the user has been transferred to the seat,  secure the chest and hip belts immediately to 
secure the user. Fasten the chest belt first using the locking clips until you hear a click. Control that 
it is  locked securely. Fasten the hip belt in the same way. The user will now be safely positioned in 
the Xplore. 

 

 

Please note that the seat must always be in place in order to ensure safe use. If the seat is 

removed the user could slide down and out of the product. 
Please also note that an assistant should be constantly checking to ensure that the user is 
sitting securely on the seat until the belts have been fastened. 

 

Summary of Contents for Xplore




















































Reviews: