background image

16

8  Maintenance

8.1  Battery (default)

The meter is fitted with a 3.6V manganese 

lithium battery that cannot be recharged or 

replaced.

The estimated lifespan of the battery is 13 

years, calculated using factory set-up and 

with the following operating conditions:

–  from -10°C to +0°C for 10% of the lifespan

–  from 0°C to +30°C for 80% of the lifespan

–  from +31°C to +55°C for 10% of the 

lifespan

WARNING!

Humidity and intense heat may 

damage the battery and reduce 

its lifespan.

The device calculates the useful remaining 

life of the battery based on memorized pa-

rameters, for example, estimated consump-

tion of the electronic board in standby, con-

sumption in transmission and the number 

of transmissions made.

Battery life depends on the data transmis-

sion frequency you choose to set.

8.2  Cleaning

No particular cleaning procedures are re-

quired. However, the installation area 

should be kept clean and periodic checks 

should be performed to ensure the required 

environmental conditions are met.

PROHIBITED

It is forbidden to use abrasive 

products, methyl alcohol, hy-

drochloric acid (35%), sodium 

bicarbonate (10%), tricresyl phos-

phate, benzol, concentrated eth-

anol, toluol, industrial petrol, 

methylisobutylketone, acryloni-

trile, cosmetic solvents, sodium 

hydrate (10%), ammonium hy-

drate (10%), nitric acid (40%), po-

tassium dichromate, acetone, 

diesel naphtha, petrol.

8.3  Disposal

The device is made from various materials 

such as: metal and plastic materials, electri-

cal and electronic components. It must be 

disposed of in accordance with current local 

regulations on industrial and special waste. 

It must not be disposed of with household 

waste.

 

The device does not contain any toxic/haz-

ardous substances or elements, including 

lead, mercury, cadmium, hexavalent chro-

mium, polybrominated biphenyl.

 

At the end of the product’s life, ensure safe 

removal and responsible disposal of com-

ponents, including recycling of batteries, in 

compliance with applicable environmental 

laws in the country of installation.

Summary of Contents for ElecTo SJ





















Reviews: