background image

10

1.11 Technical specifications for electronic timing device

Features

Description

Environmental class

0

Mechanical class

M1

Electronic class

E2

Temperature range for storage

from -10 °C to +60 °C

Ambient temperature range

from -25 °C to +55 °C

1.12 Radio technical specifications

Features

Description

Standard

Wireless M-Bus (EN13757), OMS

Modes

T1 (Default), C1

Operating frequency range

868.0 - 868.6 / 868.7 - 869.2 MHz

Radiated power

14dBm max

Antenna gain

1 dB

Range

500 m in open air

Device class

Radio class 1

Certifications/Approvals

CE in compliance with European standards

RED 2014/53/EU, 2011/65/UE and subsequent 

revisions (RoHS)

Data sent

Meter serial number, total volume, instant flow, 

date, alarms

Configuration

By radio, through the Android app

Data transmission frequency (default)

Every 2 minutes, from Monday to Friday, from 08:00 

to 18:00

Encryption

AES mode 5, not active

Alarms (default)

Magnetic tampering

Suspected leak (consumption of at least 1 litre every 

15 minutes for 48 hours)

Flow rate limit exceeded (disabled)

Backflow (reverse flow for more than 100 litres)

Meter blocked (no consumption for at least 30 days)

Reversed meter (reverse flow lasts for more than 10 

days)

 

Note: The limits can be modified using the settings 

kit

Summary of Contents for ElecTo SJ





















Reviews: