1
2
3
5
6
7
8
4
SPECIAL FEATURES
• The temperature control automatically locks after 3 seconds to prevent
accidentally pressing the wrong button. A “LOC” reminder will be shown
on the LCD when a button is pressed. Double press the Power Button
to unlock.
• Press the “Tempe” and “Temperature -” button at the same time
to switch between Celsius and Fahrenheit.
• Activate the ion function by pressing the Power Button once. The LCD
will show “Ion” once this function is turned on. It removes static
electricity to protect your hair from damage and make it smoother.
Press the Power button three times to switch off the ion function.
• You can also set a timer by pressing the Power Button once. Adjust the auto
shutoff timer from 30 minutes to 120 minutes through the “+” and “-“ Button.
When no timer is set, the brush automatically powers off when turned on
for 30 minutes.
PRÉCAUTIONS D’EMPLOI
1. Ne pas toucher les picots de la brosse lorsque celle ci est allumée sous
risque de brûlure.
2. Ne pas utiliser la brosse dans la baignoire ou sous la douche.
3. Tenir éloignée des points d’eau. Débrancher immédiatement la brosse
si elle est au contact de l’eau. Ne pas toucher la brosse.
4. Toujours vérifier l’état du câble électrique avant d’utiliser la brosse.
5. Attendre que la brosse refroidisse avant de la ranger
6. Ne pas laisser à la portée des enfants.
7. Ne pas utiliser la brosse si elle est endommagée
Dimensions : 27.0 x 7.5 x 7.8 cm
Weight : 396 g
Voltage :100 - 240V
Power : 65W
SPECIFICATIONS
1.Power Button
2.Tempe
3.Temperature –
4.LCD Display
5.Temperature
6.Timer
7.Ion Function
8.Celsius / Fahrenheit Indicator
PRODUCT DIAGRAM
HOW TO USE THE BUTTONS
• Connect the brush to a power source and it will be on standby mode with
the LCD blinking “OFF” in an alternating blue and white light. Press and hold
the Power Button for 3 seconds to turn on / off the brush.
Note:
In standby mode, the LCD will always blink “OFF”. It is recommended
to unplug the brush once you are finished using it.
• The initial temperature is set at 355°F. Adjust the temperature by pressing
the Tempe / - Button. Each press will change the temperature by 2°F.
You can also press and hold the Tempe / - Button for 3 seconds
to continuously increase / decrease the temperature.
• After the temperature setting is done, the brush will go through a temperature
adjustment process and the LCD will light up blue. On the LCD screen,
the heating process and the current temperature are clearly shown.
When done, the LCD will turn white.
CAUTION
1. The brush part is thermal conductive and becomes hot during use.
Please only hold the handle and be careful not to get burned.
2. Do not use this product in a bathtub, in the shower, or anywhere with
dripping water.
3. Keep away from water. In case it comes in contact with water or falls
into water, please immediately unplug the power. Do not touch the product
with your hands.
4. Make sure the power cable is intact. Stop using if you notice a ruptured wire.
5. Wait for the brush to cool off before storing.
6. Not a toy. Keep away from children.
7. Do not smash or drop the product. Stop using if damaged.
HOW TO USE THE BRUSH ?
Temperature
Thick / dense hair: 380 to 450°F
Medium volume hair: 320 to 380°F
Soft / fine hair: 250 to 320°F.
1. Make sure your hair is clean, dry and combed. Separate your hair into
small strands before using the brush from roots to ends. You can use it
above and under the strands for a better effect.
2. Pull and hold your hair with one hand and gently brush it with the brush
in you other hand.
The brush part is thermal conductive and becomes hot during use.
Please only hold the handle and be careful not to get burned.
