TH2250040
20-02-2015
MAD Disc Aligner
en
DA2002
20
a
a
Fitting Mounting Adapter
Fig. 42
A
. Connecter bow
B
. Z-bracket short (39-40) or long (41-42)
C
. Inserts with- or without thread
Fig. 44
1. Check the space between lathe and disc:
Keep the space between lathe and disc
short as possible, but at least 5 mm (0.04
inch). Fig 43.
2. Options to correct this dimension;
-
Choose long side or short side of the
Lathe
-
Use the adapter with longer or shorter z-
bracket(s) Fig 38-41.
3. Do not use air tools when mounting or
removing the mounting adapter and/or
the Lathe.
4. Fit the adapter on the car and adjust the
adapter height
Adapter with M10 metric inserts;
Mount the adapter to the brake caliper
ears, using the M10 bolts supplied,
Fig 34-35.
Adapter with 9, 10.5, 12.5 mm or no in-
serts;
Using the original caliper bolts, mount the
adapter to the threaded caliper ears,
Fig. 36-37.
a. Face the bow toward the axle.
b. Ensure the correct-length bolts are
used. When the bolts are fully inserted,
they must not touch the brake disc.
c. If necessary, use the spacer tubes pro-
vided to achieve the correct bolt length.
d. Ensure the slide piece hex head bolts
are loose.
5. Position the slide piece in the center of
the hub. Then hand tighten the UMA
mounting adapter M10 bolts, Fig. 44.
Fig. 43
4.3 Assemble the adapter
4.4 Fit and adjust the adapter
A
B
C