MAD Contax G2 Manual Download Page 65

Page: 65 / 82

mad-paris.com

This camera has five kinds of “Custom Functions” as shown in

the following table. When your use the camera first time after

purchase, it has been set to the standard set of Functions

(Item 0). (Instructions in this manual refer to Case 0 unless

otherwise stated.)

If you want to change the Custom functions, refer to “Setting

the Custom Functions” on page 67.

• Camera functions and operations will change when custom

features are set. Be sure to read and understand this entire

section on “Custom Functions” before attempting to customize

camera functions.

<List of the Custom Functions>

Standard Setting

Setting Change

AE Locking Operation

The main switch is set at “AEL”.

The AE lock is activated while

the shutter release is depressed

halfway (except when the flash

is fully charged).

•

When the AE lock is

continuously activated by the

main switch, the continuous

AE lock takes top priortity.

Switching the order of A.B.C.

mode

Order of exposure:

Standard —> Over —> Under

Order of exposure:

Over —> Standard —> Under

Remaining film at film rewound

The end of film is rewound into

the cassette.

The end of the film is left out of

the cassette.

Focus adjustment during

manual focus

Turn focus dial and set to

shooting distance.

While holding focus lock button

depressed, turn focus dial and set

to shooting distance.

Multiple exposure

Must operate drive mode dial

before each exposure.

Drive mode dial can be left

set to “ ” so long as multiple

exposures are desired.

“CLE”

Reset all custom functions

All custom functions are reset to standard setting (“0”).

Be careful; if the main switch is set to OFF while the CLE setting has

been selected, the contents of all custom functions set to that point

will be reset to their standard setting (“0”).

•

Be sure when the shutter release is depressed halfway or approx.

16 seconds elapse, custom functions are reset to standard setting

(“0”).

Function No.

Item No.

CUSTOM FUNCTIONS

Summary of Contents for Contax G2



















































































Search results

Summary of Contents for Contax G2

Reviews:

Related manuals for Contax G2

Brands by name

Popular brands

MAD Contax G2, Manual

Search results

Summary of Contents for Contax G2

Reviews:

Related manuals for Contax G2

Brands by name

Popular brands