6 |
P a g e
5. Windshield Installation
A.
Pre-install the Truss screws & washers into the windshield holes
as shown in the image at right.
B. Once all four of the screws are in place, gently
guide the screws into the Well Nuts in the brackets
until all four are set.
C. Hand tighten the Truss screws until they swell up behind
the bracket and are firmly holding the windshield.
Be sure not to overtighten. See photos below
Windshield Care
To clean bugs and grime off the shield use a soft wet cloth and soapy water. Don't use any products that contain ammonia,
bleach, or alcohol. Orange-oil based cleaners are fine for removing tough sticky road grime. To polish the shield or remove
fine scratches we recommend Meguiar's PlastX. This can be found at many auto parts stores or department stores like
WalMart.
Summary of Contents for Indian FTR1200
Page 5: ...5 P a g e...
