3 |
P a g e
D. There are two wiring clusters
–
one for the headlight and the other for components. Both are attached to the back
of the headlight by a plastic retainer clip. They can be simply pulled out, away from the headlight.
E.
Disconnect the electrical connector going into the back of the headlight as seen
below, then remove the headlight.
2. Base Bracket Installation
The Main Bracket consists of a small crossbar with two sides that have our quick-release spools attached
to the sides. There are (4) mounting flanges on the bracket that get attached to the red circled mounts
using (4) M6 X 12 screws asvseen in the photos below. Be sure the rollbar is at the top of the assembly.
3. Headlight Reinstallation
A. Reattach the headlight plug then push the connector retaining clips into the back of the headlight assembly.
Summary of Contents for Indian FTR1200
Page 5: ...5 P a g e...
