» spinner® spOrT Owners manual
11
chain TensiOn & aDJusTmenT
The chain on your bike has been factory set and lubricated. It
should not require adjustment initially. Over time, however, you may
need to adjust the tension. If you have any questions regarding your
chain tension, please contact customer service at
800-847-SPIN
(7746)
for consultation prior to adjusting the tension of the chain.
1)
Using the 15mm socket and socket wrench,
loosen the axle nuts on the left and right (fig. 1)
of the flywheel.
2)
To tighten the chain, turn the adjustment
screw in a clockwise rotation equally on both
sides using a 6 mm allen wrench (fig. 2).
3)
While adjusting the chain tension, work on
both sides of the flywheel. Adjust the angle of
the flywheel so it is straight front to rear and
evenly spaced within the frame side to side
(fig. 3).
» If the chain is stretched beyond
adjustment, the replacement of the chain
is recommended. Please contact customer
service at
800-847-SPIN (7746)
for more
information.
4)
Tighten the adjustment lock nuts and the axle
nuts on both sides alternating from side to
side. Replace the flywheel adjustment cover
before operation.
3
2
1
WARNING!
save
these
instructions
REMOVAL OF THE CHAIN GUARD IS STRONGLY DISCOURAGED AND SHOULD ONLY
BE PERFORMED BY AN AUTHORIZED TECHNICIAN. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SEVERE INJURY.
Summary of Contents for spinner SPORT
Page 1: ...owners manual spinner SPORT...
Page 15: ...spinner SPORT owners manual...