Manual
Instructions for use
EAMIS Lite
8
26042021V6IFU123110
MacroMedics ®
IX.
ATTACHING THE ABDOMINAL VACUUM CUSHION
To attach an Abdominal Vacuum Cushion to the SBRT Secure Arch, slot the white pins of the
cushion into the holes at the top of the SBRT Secure Arch and slide the white sliding mechanism
into the locked position. In the locked position, the arrows (on the Arch and on the sliding
mechanism of the Arch) will be in-line with each other.
Slide the two hooks of the Vacuum Cushion over the small white knobs of the Arch. Tighten the
small knobs of the Arch to secure the Vacuum Cushion in place.
To make a vacuum mould, lower the Secure Arch by turning the knobs on the side of the Arch
until the Vacuum Cushion is in tigh contact with the patient.
Care should be taken to keep the cushion valve out of the radiation treatment path.
