MACROMEDIA COLDFUSION 5 - INSTALING AND CONFIGURING SERVER, Manual, Page: 72 / 160

60 Chapter 4 Installing ColdFusion Server in HP-UX
Installing ColdFusion Server in HP-UX
The installation procedure assumes that you are installing from a CD-ROM. If you
purchased and downloaded ColdFusion Server, place the tar.gz file into its own
directory, and follow the install procedure below, substituting the location to which
you downloaded ColdFusion Server for references to the CD-ROM.
The procedure below describes a ColdFusion Server Enterprise Edition installation.
Other editions’ procedures might differ.
By default, ColdFusion Server installs into the
/opt
directory. To install into a
different directory, you must create that directory before running the installation.
1 Log in as root.
2 Mount the CD-ROM using the HP PFS extensions. For instructions, see
“Mounting the installation CD-ROM,” on page 58 .
3 Copy the tar.gz file to a temporary location on your hard disk. Run gunzip on the
file, untar the resulting tar file, and change directory to the directory created by
tar.
4 To start the installation process, enter
cfinstall
.
5 When prompted, enter the ColdFusion Server registration ID (license key).
Note
You can find your ColdFusion Server license key on the product box and the
CD-ROM packaging.
6 After entering the install directory for ColdFusion Server, the installation process
prompts you to enter the name of your Web server.
At the corresponding prompt, enter
y
to let the installation script automatically
configure your Web server. If you use Apache, you must configure it manually.
For more information, see
“Configuring Web servers manually” on page 62 . Enter
the install home directory, the instance root directory, and document root
directory for your Web server at the corresponding prompts.
7 Select whether to install the ColdFusion Server documentation and example
applications.
Warning
Because of potential security concerns, the ColdFusion Server team recommends
that you not install the example applications in production environments.
8 After selecting whether to let ColdFusion Server start automatically at system
startup, enter and verify passwords for the ColdFusion Administrator and the
Rapid Development System (RDS) for ColdFusion Studio.
9 Enter the username under which ColdFusion Server will run.
10 Press Enter to begin the installation.
install.book Page 60 Thursday, May 10, 2001 12:59 PM