Taurus LAN User Guide
Chapter 2 - System Setup
HDD Installation
Your unit may come with a pre-installed hard drive. Before opening such an enclosure,
please read the warranty and any other notes from your vendor carefully before doing so,
as this could void your warranty.
1. Remove the four screws from the
bottom of the case.
2. Push the inner enclosure out, and
remove the outer chassis.
3. Install the first hard drive by placing it
in the enclosure and connecting the SATA
plus power cables.
4. Mount the drive with two screws on
each side.
5. Attach the thermal probe with the tape
provided to the first hard drive.
Choose a location in between the two
drives but without damaging the thermal
probe when installing the second drive.
6. Install the second hard drive by placing
it in the enclosure and connecting the
SATA plus power cables.
Page 4 / Chapter 2 - System Setup
