D7-3500 User Guide
Page 9 / Chapter 2 - System Setup
9. Fasten the screws to mount the bridge
board to the heat sink.
11. Fasten the screws.
12. Align the top cover with the body and
push lightly into place.
10. Place the assembled drive back in the
plastic framing and connect the cables.
Note: Be careful not to damage any cables or components during the installation!
Remark: Only use the wireless kit designed for the D7-3500. We do not support 3
rd
party
PCI cards and installation of any other components will void the warranty.